|
|
|
Net@Board Online Manual
|
|
|
|
|
|
|
|
Topics:
 Graphical Network Monitor Network Activity and Signal Strength Icon Received Signal Strength Indication (RSSI) Historical Usage Reports DHCP Control Ping IP Information 802.11 Scanner Wireless Card Information Wireless AP Intruder Detector Network Adapters Settings Shortcut Connections Settings Shortcut- Net@Board Options Dialog
|
|
|
Graphical Network Monitor
|
It displays network activity graphically. Tap
to invoke large
graph window.
|
Goto Top
|
|
|
Network Activity and Signal Strength Icon
This icon is always at the top of the screen to indicate
the traffic status and signal strength.
: No Traffic
 : Outgoing Traffic
 : Incoming Traffic
 : Incoming and Outgoing Traffic
Goto Top
|
|
|
Received Signal Strength Indication (RSSI)
|
The received signal strength indication of network card:
: Very Good
 : Good
 : Low
 : Very Low
 : No Signal
|
Goto Top
|
|
|
Historical Usage Reports
|
Tap icon to display historical usage
reports in graphical or tabular format.
 : Tabular Format
 : Graphical Format
 : Export to .csv File
|
Goto Top
|
|
|
DHCP Control
|
Net@Board provides the functions to release and renew a lease
on an IP address previously obtained through DHCP as shown in
left figure.
To detect current Internet WAN IP (Real IP), be sure Pocket PC
is connected to the Internet and tap "Detect" button.
|
Goto Top
|
|
|
Ping
|
Net@Board uses Ping function to verify network connectivity, check transmitted and
received data integrity, indicate network traffic loading by measuring round
trip time, and provide the MAC address of an IP address in the same subnet.
|
Goto Top
|
|
|
IP Information
|
IP Infomation shows the network card information, including type and speed
of the network card, MAC address, IP address, subnet mask, gateway,
DNS servers, and WINS servers.
|
Goto Top
|
|
|
802.11 Scanner
|
It is a Wi-Fi surveying tool for the Pocket PC. Use this function
to show the information of access points nearby:
- Current Associated Access Point SSID And Its BSSID
- Access Point SSID
- Access Point Signal Strength
 : Very Good
 : Good
 : Low
 : Very Low
 : No SIgnal
- Access Point WEP Status
 : WEP Enabled
Blank : WEP Disabled
- Access Point BSSID
- Access Point Channel Number
- Access Point Mode
- Access Point Type
- Access Point Supported Rates
|
Goto Top
|
|
|
Wireless Card Information
|
Use this function to show the network card's radio configuration
parameters:
- Beacon: The interval between beacon message transmission. This
value is specified in Kusec (1024 usec).
- ATIMWindow: The ATIM window is a short time period immediately
after the transmission of each beacon in an IBSS configuration.
- Frequency
- Authentication: Open Authentication Mode or Shared Authentication Mode
- Network Type: Frequency-Hopping Spread-Spectrum(FHSS) or
Direct Sequencing Spread-Spectrum (DSSS)
- Mode: Independent Basic Service Set Mode (ad hoc mode) (IBSS) or
Infrastructure Mode
- WEP: Wired Equivalent Privacy (WEP) Enabled or Disabled
|
Goto Top
|
|
|
Wireless AP Intruder Detector
|
Use this function to detect unwanted network intruders:
- Tap "Detect" button to detect your whole network (class-c domain).
- Tap "Export" button to save the scanned result to Excel .csv Files.
 : This Host is in the Safe List.
 : This Host is not in the Safe List.
- Short Tap on or
to Remove/Add it from/to the Safe List.
|
Goto Top
|
|
|
Network Adapters Settings Shortcut
|
Tap this icon to quick access network adapters settings.
|
Goto Top
|
|
|
Connections Settings Shortcut
|
Tap this icon to quick access connections settings.
|
Goto Top
|
|
|
Net@Board Options Dialog
Follow the steps below to navigate to Net@Board options dialog:
- Tap "Start" menu on your Pocket PC Today screen.
- Tap "Settings" menu item.
- Tap
 (Today) icon.
- Tap "Items" tag.
- Select "Net@Board" item.
- Tap "Options..." button.
|
Adapter Dialog
Use this dialog to select an adapter to monitor.
|
|
Options Dialog
Use this dialog to manage traffic log and network activity icon location.
|
|
About Dialog
Enter your registration code in this dialog to unlock the program.
|
Goto Top
|
